32A 3.5KW Wall-Mounted EV Charging Station-Type2 Plug J1772 Electric Vehicle Charging Points

Product Detail

?32A Wall-Mounted EV Charging Station ?




Specifications: (BS-B10-GA32, EV Charging Station)

Input AC voltage: 220 V ± 10%

Output AC voltage: 220 V ± 10%

Output maximum current:  32 A

Rated power:  7.5KW

Single Phase

Charging Connect Standard:  IEC 62196-2 / J1772

Rated AC frequency:  50 Hz / 60Hz

Cord Length:  20 feet

Install:  Wall-mounted

Protective measures :earth leakage protection; Lighting strike protection; Surge protection;

Insulation resistance: use a megger of 500V open-circuit voltage to test the insulation resistance between each circuit of the AC point and its exposed conducting parts, and between each independent circuit, the measured insulation resistance = 300 MÙ.

Dielectric strength: between each electric circuit and exposed conducting parts, and between each independent circuit of the AC point, there shall be no sign of insulation breakdown and flashover when being tested under 2kV (50 Hz) AC test voltage with the duration of 1 min.

Working environment: - 20 ? ~ + 50 ?,5% ~ 95% with no condensation

Storage environment: - 25 ? ~ + 70 ?,5% ~ 95% with no condensation

Enclosure:  IP 55

Weight:  5kg

Dimensions:  570*400*280 mm




Environmental and Transportation Conditions

Professional design,  makeing BS-B10 have superior performance

Environmental parameters			(Work)	(Storage)	(Relevant standards)	Remarks
Type	Parameters	Unit
(Temperature )	Low temperature	?	-20	-40	EN61851-1-2011 GB/T 18487.1 GB/T 2423.3-2006 IEC 62196-2 2010 SHEET 2-llb SAE J1772 2009
	High temperature	?	50	85
(Humidity )	Low relative humidity	RH%	5	5
	High relative humidity	RH%	93	93
	Condensation	Yes/No	No	No
	Dew formation	Yes/No	No	No
(Altitude)	Height	m	2000	2000	GB/T 2423.3-2006 IEC 62196-2 2010 SHEET 2-llb SAE J1772 2009
(Air pressure)	low pressure	kPa	86	86
	high pressure	kPa	106	106

Items	Application environment
Work	Outdoor/indoor
Transportation	1. Land transportation 2. Water transportation 3. Air freight
Storage	Temperature- and humidity-controlled locations




Electrical safety

Comprehensive protection system


We designed all kinds of protective measures for BS-B10: Overcurrent protection, Overvoltage protection, Llightning protection, Electric leakage protection, and Short circuit protection. This is a deceive which can ensure the safety using for everyone.




Detecting faulty wiring
The intelligent BS-B10 also detects faulty wiring of the infrastructure-side socket and, in addition, controls the incoming protective conductor before charging begins.

Safety	Items	Name	Rating	Conditions
	Insulation resistance	AC(input)-ground	=10MO	Environmental temperature: 25±5? Relative humidity: <93% (no condensation) Testing voltage: 500VDC  1min
		AC(output)-ground	=10MO
	Dielectric strength	AC(input)-ground	Steady-state leakage current<10mA	2,000V ACV (or equivalent DCV) for 1 min, no breakdown, no flashover
		AC(output)-ground	Steady-state leakage current<10mA	2,000V ACV (or equivalent DCV) for 1 min, no breakdown, no flashover
	Leakage current		=30mA	Following heat and moisture test, the test with 1.1 times rated voltage finds no failure.




Input and Output
BS-B10 have highly strong compatibility,  stable charging status , and can be applied to both Europe and US market.

Type	Parameters
Input	Rated input voltage and its range	Single-phase AC220V±15%
	Rated input frequency and its range	50±5Hz or 60 ±5Hz
	Maximum input current	=35A
Output	Output voltage	AC220V
	Output current	AC32A

Please be free to buy the cheap 32a 3.5kw wall-mounted ev charging station-type2 plug j1772 electric vehicle charging points from our factory. As one of the leading manufacturers and suppliers, our company will offer you quality products wholesale service with low price. Don't miss it.